Showing posts with label productivity and quality management. Show all posts
Showing posts with label productivity and quality management. Show all posts

Islamic Finance: Sources of Shariah

Introduction

Understanding Islamic finance begins with understanding the sources of Shariah.

Shariah provides the foundation for Islamic beliefs, ethics, transactions, and daily conduct. In Islamic finance, Shariah serves as the primary framework that guides financial decisions, business practices, and economic activities.

As far as I understand, there are four primary sources of Shariah:

  1. The Qur'an
  2. The Sunnah (Hadith of Prophet Muhammad SAW)
  3. Ijma' (Consensus of Qualified Scholars)
  4. Qiyas (Analogical Reasoning)

Together, these sources help scholars develop guidance for both classical and contemporary issues, including those related to finance, banking, investment, and business transactions.

The Primary Sources of Shariah

1. The Qur'an

The Qur'an is the primary and highest source of Islamic law.

It contains divine guidance revealed by Allah (SWT) to Prophet Muhammad (SAW).

The Qur'an provides fundamental principles concerning:

  • faith,
  • worship,
  • morality,
  • social relationships,
  • and financial transactions.

Many Islamic financial principles, including the prohibition of riba (usury), are derived directly from the Quran.

2. The Sunnah and Hadith

The Sunnah refers to the teachings, actions, approvals, and practices of Prophet Muhammad SAW.

These teachings are preserved through Hadith literature.

The Sunnah explains, clarifies, and complements the guidance found in the Qur'an.

In Islamic finance, many practical applications of contracts, trade ethics, and business conduct are derived from the Sunnah.

3. Ijma' (Consensus)

Ijma' refers to the consensus of qualified Islamic scholars (mujtahid) on a particular issue.

When scholars collectively agree on a ruling after careful study of the Qur'an and Sunnah, that consensus becomes an important source of guidance.

Ijma' helps maintain consistency and unity in understanding Islamic law, especially when addressing new situations that were not explicitly discussed during the time of the Prophet SAW.

4. Qiyas (Analogical Reasoning)

Qiyas refers to analogical reasoning.

It is a method used by scholars to derive rulings for new issues by comparing them with existing rulings found in the Qur'an and Sunnah.

For example, when a new financial product emerges, scholars may examine its characteristics and compare it with known transactions that already have established rulings.

If the underlying cause is similar, the ruling may also be similar.

Qiyas allows Islamic law to address modern challenges while remaining connected to its original sources.

Understanding Fiqh

Fiqh is often translated as Islamic jurisprudence.

In simple terms, fiqh is the human understanding and interpretation of Shariah.

While Shariah represents divine guidance, fiqh represents scholars' efforts to understand and apply that guidance to real-life situations.

Fiqh covers many aspects of life, including:

  • worship,
  • family matters,
  • business,
  • finance,
  • and social interactions.

Because fiqh involves human interpretation, different scholars may sometimes arrive at different conclusions while remaining within the framework of Islamic Law.

What Is Usul al-Fiqh?

Usul al-Fiqh means the principles or methodology used to derive fiqh from the sources of Shariah.

The word "usul" literally means "roots" or "foundations."

Usul al-Fiqh provides the tools and methods that scholars use when interpreting the Qur'an and Sunnah and when applying concepts such as Ijma' and Qiyas.

In many ways, Usul al-Fiqh acts as the framework that guides scholarly reasoning and ensures consistency in legal Interpretation.

A Simple Analogy

One way to understand the relationship between Shariah, Usul al-Fiqh, and Fiqh is through the example of a hijab designer.

Imagine a designer who wants to create a fashionable hijab collection.

The designer understands:

  • fabric materials,
  • colors,
  • patterns,
  • customer preferences,
  • and styling techniques.

The designer also develops a method for creating and wearing the hijab appropriately.

This process of selecting materials, applying design principles, and following a structured method can be compared to Usul al-Fiqh.

The final hijab product that customers wear and appreciate can be compared to Fiqh.

In this analogy:

  • Shariah represents the original source of guidance.
  • Usul al-Fiqh represents the methodology used.
  • Fiqh represents the practical outcome. 

 

Final Reflection

The beauty of Islamic law lies in its balance between divine guidance and thoughtful human understanding.

The Qur'an and Sunnah provide the foundation.

Ijma' and Qiyas help scholars address new situations.

Usul al-Fiqh provides the methodology.

Fiqh provides practical guidance for everyday life.

Together, these elements allow Islamic teachings to remain relevant across different times, cultures, and circumstances while preserving their connection to the original sources of Shariah.

Understanding these foundations helps us better appreciate how Islamic finance develops its principles and responds to the needs of modern society while remaining faithful to Islamic value. 

Why Blue Ink is Often Used for Signatures



Sometimes small administrative habits may look simple, but they can become very important later.

There is a saying:
“Prevention is better than cure.”

This also applies to administrative work and documentation.

Many document processes may seem simple at the beginning, especially financial or official documents. However, problems can appear later when different people have different interpretations about the authenticity of documents, signatures, or payment records.

Years ago, when I worked as a finance officer in an international non-profit organization, the Chief Financial Officer once told me:

“It is better to use blue ink for signatures.”

Now, after joining a government institution, I noticed that many directors and officials also use blue ink for signing documents.

This shows that the use of blue ink for signatures has already become common practice in many different organizations.

One of the main reasons is simple:

Blue ink helps distinguish an original document from a photocopy.

Since most documents are printed in black ink, a blue signature becomes easier to identify as an original handwritten signature.

A Simple Story About Administrative Misunderstandings

There were two people:

  • A = Event Coordinator
  • B = Food Supplier

The event coordinator requested a blank receipt that was already signed, stamped, and included the supplier’s name, in addition to the printed restaurant receipt.

However, the restaurant had a strict policy:

They could not issue a blank receipt.

The supplier required:

  • the event name,
  • detailed information,
  • and the total actual expenses.

At first, both sides became suspicious and confused.

The coordinator wondered:

“Why can’t they just provide the blank receipt?”

Meanwhile, the supplier wondered:

“Why is a blank receipt needed if the payment receipt already exists?”

The real issue was actually very simple:

The coordinator needed to combine several expenses together, including:

  • food costs,
  • delivery fees,
  • and stamp duty fees.

The supplier already understood this possibility, but because there was no clear communication between them, misunderstandings appeared.

Both parties actually had good intentions.

The supplier wanted accurate documentation.
The coordinator wanted complete reimbursement records.

But due to limited communication, the process became uncomfortable.

Later, another question appeared from the finance department:

“Why is the amount on the printed receipt different from the amount written on the handwritten receipt?"



What Does This Have to Do With Blue Ink?

This example is actually very similar to the use of blue ink for signatures.

Both relate to administrative trust and document authenticity.

People want to ensure that:

  • the document is original,
  • the amount is correct,
  • the activity truly happened,
  • and the signature is genuine.

When a document is signed using blue ink, it becomes easier to identify that the signature was written directly on the original document and not simply copied or printed.

This has become a commonly accepted practice in many offices and organizations.

Digital Signatures and Modern Administration

Today, many businesses also use digital signature applications.

Digital systems are now becoming more common and practical.

However, whether using digital signatures or handwritten ones, the main goal remains the same:

To ensure that documents are:

  • authentic,
  • accurate,
  • transparent,
  • and properly documented.

This article focuses more on the traditional use of blue pens for signatures, but the principle behind it remains very relevant in today’s modern administrative  processes.

Why Many People Prefer Blue Ink

Some references also explain why blue ink is often preferred:

“Many copiers are now so advanced that black ink may look like part of the photocopy.”

Another explanation says:

“Blue ink contrasts better with black printed text, making signatures easier to identify.”

Others also mention that blue signatures are easier to prove as original because black signatures can sometimes look printed or duplicated.

Because of this, many professionals recommend:

  • Black ink for official document text,
  • Blue ink for signatures,
  • Blue or colored ink for notes and learning purposes.
"I'm starting to prefer signatures in blue. Many copiers are so good now that black ink can look like part of a photocopy."
"Blue pens. Of course blue pens. Because they contrast better with the documents you're writing on, which invariably use black ink."


Because blue is easy to prove as an original signature, while black can be reproduced in printing.  That was the reason in many cases for using blue, you could guarantee that a signature was original and not printed.  


While many official documents must be written in black, blue is actually the smarter choice for signatures.

I’ll get into details below, but here’s what I generally recommend:
  • §  Black ink for filling out official records.
  • §  Blue for business signatures and most others.
  • §  Black for memos and work correspondence.
  • §  Blue (or red) for notes and most learning purposes.
  • §  Blue for credit card applications.
  • §  Blue (or another color) for creative purposes.


......."Dokumen-dokumen penyimpanan dana itu saya serahkan ke UPTD Kasda. Bahkan seluruhnya ditangani UPTD Kasda. Biasanya saya pakai tinta biru, tapi itu tadi kok tinta hitam dan ada lekukannya. Makanya saya meragukan," katanya............


Quality Movement

Do you believe that CEO’s and business managers should be skeptical about the quality movement, or should they embrace the quality movement and try to involve their firms in as many quality initiatives as possible? Please explain your answer.

Answer:

CEO’s and business managers should not be skeptical about the quality movement. Dean and Bowen in their book already characterize the quality movement along three principles: customer focus, continuous improvement and teamwork using the Baldrige Award criteria as a framework. In practice, the CEO’s and Managers could adopt this theory for their company’s quality movement. The result from adopting quality movement is not get in the short term. It is might be appeared in long term. For example, in long term the financial performance stronger, the customer relationship effectively managed and the sales stronger. Many theories and research have been done about the quality improvement. For example, Stephen B (2001) argued that continuous improvement not only applies to quality processes in a business but also applies to the quality movement itself and consequently, the quality movement is continuing to mature into more mainstream management discipline. Cole has been described the early years of the quality movement in the 1980s when entrenched organizational barriers prevented effective American responses to Japanese quality threats. So, the manager should not be skeptical about quality movement since it has been practicing by many companies.

ii. Compare and contrast Deming’s, Juran’s and Crosby’s perspectives of quality management. What are the major similarities and differences between their perspectives?

Answer:

The Quality Movement and Organization Theory
Deming: The user’s perspective.
In Deming’s view, the consumer is by necessity the most important part of the production system, without a consumer, there is no reason to produce. To Deming, the only meaningful definition of quality is that which the consumer specifies. A product could meet every possible technical specification and be offered at an appropriate price, but if it is the wrong product, it is worthless to the consumer. However, Deming also argues that quality has a short-term and a long-term component. It is important to anticipate the consumer’s future needs as well as those of the present in order to continue to meet the consumer’s definition of quality and maintain a competitive advantage. The famous Deming Cycle (Plan, Do, Study/Check, Act):
1. Design the product.
2. Make it; test it in the production line and the laboratory.
3. Put it on the market
4. Test it in service; find out what the user thinks of it, and why the nonuser has not bought it.

Juran: the manufacturer’s perspective

Juran also sees quality as concept which can only be usefully defined by the consumer. Strictly put, Juran defines quality as "fitness for use." Juran goes on further to quantify "fitness for use" in two different categories:
1. Product features that meet customer needs
2. Freedom from deficiencies
The second objective is achieved through measuring the results of production and how well-received the product is in the marketplace. By comparing the actual results with the desired results, acting on deficiencies and providing feedback into the system, continuous improvement can be attained. These three activities - quality planning, quality control, and quality improvement - are known as the Juran Trilogy.

Crosby: the management perspective
Crosby mainly focus on management-centered view. In Crosby’s view, if requirements are clearly communicated to all levels of the organization, then an attitude of "no reason for not doing it right" can be built throughout the company.

iii. Deming believed poor quality was not the fault or workers but resulted from poor management of the system for quality improvement. Do you agree with Deming’s stand on this issue? Why and why not?

Answer:

Yes, I agree with Deming’s stand point in this issue. Poor management system could not maintain continues improvement. The worker is just follow what has been stated in the system. It is important to implement the good management system that could support worker doing their job well so that the worker happy in doing their job. As stated by Deming that management of the system for quality improvement has a significantly positive effect on operational and business performance, employee relations and customer satisfaction in short and long term. And Deming also stated that “employees are viewed not as point of control, but as willing collaborators in an ongoing effort to improve every aspect of the organization’s work.”

iv. Feigenbaum’s quality management philosophy is summarized by the following three points: quality leadership, modern quality technology, and organizational commitment. Discuss how failure to adopt these points will compromise quality.

Quality leadership is important for all organization because leadership is a way of managing the organization. By managing every aspect of the organization, management could give the top value to their customer. In all organization there are processes of production, sale and distribution, there are also processes to find out about customer needs and problems, there are processes about couple market information on new technologies. All process will well do by creating an environment which allows and encourages everyone to contribute to the organization. This is one of aspect of total quality leadership, to create an environment of total teamwork. The focus of total quality leadership is on quality, the quality of every product and service and the quality of the process. The environment of total teamwork cannot be developed under management by control.

Modern quality technology, quality technology is important for all organization because in continues improvement, it is the quality of an organization’s information’s system that determines the effectiveness for all process in the organization.

Organizational commitment
is the relative strength of an employee’s attachment or involvement with the organization. Organizational commitment is important because committed employees are less likely to leave for another job and are more likely to perform at higher levels. Managers who want to increase organizational commitment among employees should ensure that employees receive feedback about their performance. This feedback may include frequent, informal performance, discussion with a supervisor, access to performance data and formal periodic performance reviews. Participation in work by offering suggestions and joining in decisions was very important to employees. The simply implementing HRM practices such as benefits, job descriptions or SOPs is not enough to earn employee commitment. In order to enjoy the benefits of a committed, therefore stable and high – performing workforce, managers must offer a workplace with effective performance feedback and opportunities participation.

Syari Dress


References:
Quality Management System. (n.d). Retrieved from http://campus.fortunecity.com/newton/98/djc.htm.

Stup, R.E .(2006).Human Resource Management and Dairy Employee Organizational Commitment. Retrieved 9 February 2010 from http://nature.berkeley.edu/ucce50/ag-labor/7research/Stup06.pdf


Joiner,B.L and Scholtes,P.R (1988), Total Quality Leadership vs Management by Control. Retrieved 8 February 2010 from http://cqpi.engr.wisc.edu/system/files/r006.pdf.



Driver Productivity



The Innovation for Development Report 2010-2011:
Innovation as a Driver of Productivity and Economic Growth
Is the productivity measure of shipments per day per truck still useful? Are there alternatives that might be effective?

Yes, the productivity measure of shipments per day per truck is still useful so that Smith could get the ratio of shipment per day for one truck. For example, there are 24 trucks and each truck ships the items approximately 10 shipments per day and Smith knows the productivity ratio of each truck. It is better to improve the quality of service to the customer by knowing the customer’s ship times so that Smith could manage the schedule of the truck before operating. Besides that, smith could measure the productivity in terms of dollars per day per truck so that he knows the direct profit each month. The measuring based on dollar could tell him whether he could increase the cost for adding trucks and drivers.  


What, if anything, can be suggest to the management to reduce the daily variability in pickup call-ins? Can the driver be expected to be at several locations at once at 5:00 P.m.?
Leading Beyond Lean:
 The Seven Drivers of Productivity


The management could reduce the daily variability in pick up call – ins by managing the schedule of customer’s ship times. The management could upgrade their customer database and knowing the customer’s schedule. The software can be used for automatically populate the customer information. The driver cannot be expected to be at several locations at once at 5:00 P.M, the management could anticipate this by shorter the crossing ways for shipments to reduce the time consuming when shipping. The access to technology is important to minimize the miscommunication between the staff in office, driver and customer so that the driver knows all the information while they are in office, at the customer location or on the road.

How should the company improve the productivity of the drivers? Discuss

First the productivity of worker is depends on their health. For example, more than half of commercial drivers report regular tobacco use which increases their risk for heart disease, stroke, lung disease and cancer. Health is essential component for worker especially truck driver. It is important to introduce the health program that could improve health status of truck drivers. Second, the incentive by performance could be implemented to the driver to improve their motivation in doing working. Third, the proper training could be conducted for the improvement in work method and efficiency.



References:

Concentra Newsroom, (2009). Fit to Drive: Improving Commercial Driver and Productivity. Retrieved 24th January 2010, from website: http://www.concentra.com/Newsroom/Channels/Health-And-Wellness/Fit-To-Drive/default.aspx

Driver productivity is like a layered garden — shaped not only by speed and schedule, but also by attitude, well-being, and operational structure.
In this visual metaphor, one set of glossy, tightly packed leaves represents the routines and tasks drivers must execute daily. The larger, elongated leaves beneath symbolize the supporting systems: fair compensation, route optimization, and proper rest.

Quranic Insight:

“Are those who know equal to those who do not know?”

Quran Surah Az-Zumar (39) Ayat 9

Productive drivers are not just fast — they are informed, trained, and supported. Growth in output only flourishes when the roots of understanding and respect are deep.

“Layered leaves, layered lives — a stunning metaphor for driver productivity and operational support systems.”

📷 Available now on Shutterstock — perfect for blogs, training manuals, or HR productivity frameworks.

Productivity Growth

Give 5 reasons why Malaysia is on the top three in terms of productivity level and growth?

1. Malaysia focuses in implementing the eighth Malaysian plan successfully and continues in the ninth Malaysian plan. The ninth Malaysian plan emphasis on the improvement of towards enhancing productivity and innovative capacity. During the Eighth Plan period, gross domestic product (GDP) in real terms grew at an average rate of 4.5 per cent per annum supported by domestic demand and exports. The productivity and efficiency enhancing by becoming more knowledge-based and the productivity factor contribution undertaken through programmes to upgrade skills and management capabilities, develop a more creative and skilled workforce, improve the level of educational attainment, intensify R&D and innovation activities and increase utilization of technology and ICT in all sectors of the economy. During the Ninth Plan period, macroeconomic management will focus on ensuring macroeconomic stability to maintain the economy on a sustainable growth path. Private domestic demand is expected to register a strong growth that will enable the Government to continue with its pragmatic fiscal management. An appropriate monetary policy will be implemented to promote growth and price stability.

Productivity Growth in the Manufacturing Sector:
Mitigating Global Recession
2. The productivity initiatives by the industries and pro – business policies adopted by the government that facilitated domestic business activities. The strong domestic consumption and investment to grow the Gross Domestic Product (GDP) Malaysian economy by 6.3 % in 2007.The domestic consumption increased by more 11 % as a result of higher expenditures by both the public and private sectors. Malaysia also could manage the expansion in export of goods and services more than 4 %.

3. The high capacity utilization in manufacturing. The capacity utilization rate in the manufacturing sector remained high averaging 80 per cent per year. Growth was led by resource-based industries which recorded an average growth of 5.0 per cent per annum. The main contributors to growth were the chemical products, food processing, rubber products and paper product subsector. For non – resources based industries, the electronic subsectors remained the largest contributors. Besides the high capacity utilization, the growth of manufactured export of those products to china, India and Easter Europe reflects the sustained expansion in demand.

4. Productivity growth of the economic sectors. Manufacturing’s productivity to grow with high capacity utilization and the implementation of productivity and quality system. In the service industry, high productivity growth was in Finance and Transport sectors. In Agricultural sector, the continuous adoption of labor – saving technologies and good agricultural practices. In utilities sector, there are sustained demand for electricity and water. And the construction sector, strong demand for non – residential properties.

5. Competitive performance by consistently performed well in economic performance and business efficiency. In the population greater than 20 million categories, Malaysia was ranked at 4th position for business efficiency as an effort from the government in facilitating business operation. Malaysia was ranked 6th position in both the economic performance and government efficiency. Both the government’s pragmatic and flexible management approach have enabled the economy to raise its competitiveness in facing global challenges. In terms of labor cost competitiveness, the cost of producing one unit of product or service in Malaysia was lower by 0.7%, while other countries registered higher cost of production. In China, the unit labor cost had increased by 13.2%, Hong Kong (2.8%), Australia (2.8%), Norway (2.2.%), the USA (1.9%) and the United Kingdom (1.7%). The productivity growth of 4.2% achieved by Malaysia had led to sustained labor cost competitiveness.



References:
Ninth Malaysian Plan 2006 – 2010: Macroeconomic Stability for Growth. (n.d). Retrieved January 7, 2010, from website: http://www.utusan.com.my/utusan/SpecialCoverage/RMK9/english/Chapter2.pdf.
Productivity report (2007). Malaysia’s Productivity Performance. Retrieved January 7, 2010, from website: http://www.mpc.gov.my/files/P&Q%20Glossary/Chapter1.pdf.


🌿 Productivity Growth: Lessons from Nature

In the rhythm of nature, we find one of the clearest metaphors for sustainable productivity. A flourishing garden is never accidental — it is the result of careful nurturing, time, and alignment with natural laws. The fresh green leaves in this image remind us that growth, whether in business or personal productivity, demands consistent input and space to flourish.

The Qur’an beautifully captures this principle in Surah Ibrahim (14:24–25):

“Do you not see how Allah presents an example? A good word is like a good tree—its root is firmly fixed and its branches are high in the sky. It produces its fruit all the time, by the permission of its Lord.”
(Quran Surah Ibrahim: 24–25)

Like the tree, productivity grows when rooted in purpose and nourished by knowledge and action. In entrepreneurship, education, or daily work, we are called to plant well, prune wisely, and remain consistent.

📸 Photo available on Shutterstock:
Perfect for illustrating blog posts or reports on growth, sustainability, business development, or productivity strategy.

“Let growth be visible. Use this metaphor-rich visual to spark insight in your next project.”